MB Quart NT1116LB 6.5" 120 Watt 2 Way Black Wake Tower Speaker w/ LED Light

MB Quart NT1116LB 6.5" 120 Watt 2 Way Black Wake Tower Speaker w/ LED Light

MB Quart

  • $143.39
FREE Shipping (to the 48 us states)

Only 1 left!

CERTIFICATIONS
IPX67, Conformal Coated, UVA Certified, CEA426B
RMS POWER HANDLING (CEA426B)
60 watts
PEAK POWER HANDLING (CEA426B)
120 watts
IMPEDANCE
4 ohm
FREQUENCY RESPONSE +/- 10DB
30-22kHz
FREQUENCY RESPONSE +/- 3DB
70-20kHz
SENSITIVITY (1 WATT/1 METER)
91dB
TOWER LENGTH
10.6" (270mm)
HANG HEIGHT
9.035" (229.5mm)
HEIGHT
8.4" (215mm)
WIDTH
8.4" (215mm)
COLOR
Black
MARINE CERTIFIED
Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand
IPX67
Tested to the highest Marine and Motorsports standards for resisting the elements
1" PURE TITANIUM DOME TWEETER
Very smooth musical response, high output with minimal required amplifier power
WATER RESISTANT SPIDER
Woven red aramid fiber composite spider to stabilize the cone and voice coil in all musical situations. Armid fibers do not degrade over time and are not susceptible to temperature swings
6.5" COMPOSITE POLY MIDRANGE
UVA Protected, water resistant composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame
HIGH TEMPERATURE VOICE COIL AND FORMER
Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight
HIGH ENERGY Y30 MOTOR ASSEMBLY
High energy strontium ferrite magnet for higher output with minimal amplifier power
MARINE CERTIFIED CROSSOVER
Conformal Coated, Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection
INJECTION MOLDED ENCLOSURE
Heavy duty ABS cast enclosure provides strength and improved bass response with increased volume while remaining very light weights
STEEL REINFORCED
The mounting system between the pipe mount and the tower enclosure has an internal steel mounting plate for additional strength
CENTERING RING
Centering ring allows the speakers to tip left/right when mounted to an arced mount
POWDER COATED DIE CAST MOUNTS
Mounting hardware are Die Cast for strength and powder coated to resisted outdoor elements of sun, spray and dust
FLEXIBLE MOUNTING
Eleven mounting hardware options from 1.5" to 2.75" included
ILLUMINATION
Limitless color choices with color on, off, strobe and programmed “light shows� possible. Optional N1-RC required for control of lighting systems and to sync multiple illuminated speakers. Pre-programmed demo mode included on all lighted systems
Brand NEW


We Also Recommend