Skip to product information
1 of 2

Viking Electronics

Viking electronics DVA-2WA Promotion On Hold Device

Viking electronics DVA-2WA Promotion On Hold Device

Regular price $198.79
Regular price Sale price $198.79
Sale Sold out
FREE Shipping

Low stock: 9 left

  • Digital announcer/recorder
  • Built in 2 watt amplifier to connect directly to speakers
  • Designed to providemusic and promotion on hold by using playback in a continuous loop or alternating between promotions and an auxiliary music source at 2 second to 30 minute intervals
  • Any number of multiple messages may be recorded
  • Announcer comes with four professionally pre-recorded promotions on hold pacifier messages, as well as, power supply and cabling for an easy plug and play installation
  • Output may be connected directly to loudspeakers with messages repeated in timed intervals or played at the push of a button for museum displays, information booths, point of interest locations, etc.
  • 7.5 minutes of user recordable memory (select fromuser recorded messages or four pre-recorded on-hold pacifier messages)
  • Three playback options:on demand, continuous, and timed intervals
  • Non-volatile memory (no batteries required)
  • Record from electret mic, carbon handset, tape, CD, PC sound card or any line level device
  • 600 ohm audio output for high wattage amplifiers
  • Multiple message capabilities (total number of messages only limited to maximum record time)
  • AGC (Automatic Gain Control) for trouble free recording
  • Auxiliary audio (MOH) input for between message background music
  • Remote trigger input for on-demand playback from a remote contact closure
  • Press and hold play mode
  • Status LED forrecord and playback indication
  • Master and auxiliary input volume controls
  • I.O. communications port (allows only one DVA-2WA to announce at a time)
  • Power: 120V AC/12V DC, 500mA adapter provided
  • Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
  • Shipping weight: 1.0 kg (2.2 lbs)
  • Environmental: 0*C to 32*C (32*F to 90*F) with 5% to 95% non-condensing humidity
  • Frequency response: 100-3.4KHz
  • Sampling rate: 64K (equivalent)
  • User message length: 7.5 minutes maximum
  • Recording audio input level: 30mV - 1.0V RMS (AGC range), 600 Ohm audio output level: 0.3V RMS maximum (across a 600 ohm load)
  • Speaker output power: 2 watt peak
  • Connections: (1) 6-position cage clamp terminal block, (3) 3mm (1/8") audio jacks, (1) handset jack
  • Pre-recorded pacifier message length: 30 seconds total
  • Minimum speaker impedance: 2.66 Ohms: (3) 8-Ohm speakers
  • View full details